Electric –Hydraulic thin ceramic gate valve

Characteristics


This
valve is application as an on-off media containing high –hardness grains ,such
as cinder water , or for pipelines with both soft grains and corrosive media
.its nominal pressure is 1.0 Mpa ,and application temperature ≤ 150℃ 。the sealing surface adopts
had seal , and all medium contacting parts are made of structural ceramic with
extremely high chemical stability and hardness .Therefor , it has extremely
strong resistance to abrasion ,corrosion and erosion .good heat insulation and
small thermal expansion . Its feed inlet is fully through without any blocks
and it has strong abrasion resistance a good seal ability and a small strating
load , with little ash seizure or accumulation .It adopts a high-grace
toughened structural ceramic seal ,featuring high mechanical strength
,strong abrasion resistance ,a long service life and a compact structure
which can be installed at any angle


■ Material for main Parts

Item	Name	Material	Item	Name	Material
1	Body	WCB	7	Stem	Q235+Hcr
2	Disc	Ind+Ceramic	8	Yoke	Q235
3	Seat	Ind Ceramic	9	Gasket	10
4	Adjusting Screw	35#	10	Nut	25
5	Packing	PTFE	11	Electric	Assemble
6	Packing Gland	WCB

■ Application Specification

Design & Manuafcture		GB/ T 8691
Connection end dimension	Face to face	GB/T 15188.2
	Flange dimension	Gb/T9113.1
Inspect & Test		JB/T 8691
Material	Carbon Steel	GB/T 12229
	Stainless Steel	GB/T12230
Mark		GB/T12220
Supply		GB/T12252

Contact us if you need more details on Electric –Hydraulic Thin Ceramic Gate Valve. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Ceramic Thin Gate Valve、Electric & Hydraulic Gate Valve. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Ceramic Valve > Ceramic Knife Gate Valve