Find Dual Plate Check Valves, Dual Plate Wafer Check Valve, Dual Plate Stop Check Valve on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Check Valve > Dual Plate Check Valve > Flanged Dual-plate Check Valve

Flanged Dual-plate Check Valve

Product Description


Flanged Dual-plate Check Valve


Dual-plate check valves are are bonnetless and mounted between pipe flanges (wafer style). In this case, the valve includes two spring loaded half-moon shaped discs that rotate about their shaft. The actual designs of these valves vary between design models and manufacturers. Most have multiple flat seats. The dual-plate check valve disc has short rotational disc travel and responds quickly to flow stoppage or reversal, thus the potential for moderate water hammer does exist. It is somewhat better than the swing check valve at minimizing potential water hammer, but with a much higher pressure drop.






Depending on the design, maintenance effort ranges from relatively simple to difficult. All dual-plate check valves must be removed from the line to perform maintenance due to the bonnetless design. The dual-plate check valve also results in a higher pressure drop when compared to a tilting disc check valve of the same size.






Although most of the wafer check valves are installed between two flanges, and no need to be flanged type, some other applications may need flanged type wafer check valve for better alignment of valves. The flanged valve body could be cast or forged upon customer's requirement.






Features of Flanged Dual-plate Wafer Check Valves:


One Piece Body Design

Short Face-to-face

Inline Double Plate

Spring-loaded Disc for Quick Closure

Flanged Wafer End




Applicable Standards of Flanged Dual-plate Wafer Check Valves:

a) Design&Manufacture: API 6D, API 594

b) Face to Face: API 6D, ASME B16.10, EN 558

c) Connection End: ASME B16.5, EN 1092, JIS B2220

d) Test and Inspection: API 6D, EN 12266, API 598




Sizes: 2" - 48" or DN50 - DN1200

Pressure Rating: Class150 - Class1500 or PN16 - PN250

Material of Valve Body: WCB, LCB, WC6, WC9, C12, C5, CF8, CF3, CF3M, CF8M, etc.




Contact us if you need more details on API Flanged Dual Plate Check Valve. We are ready to answer your questions on packaging, logistics, certification or any other aspects about DIN Flanged Dual Plate Check Valve、Flanged Dual Plate Check Valve. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Check Valve > Dual Plate Check Valve

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters