DIN/EN Piston Check Valve

DIN/EN Piston Check Valve


Piston check valves are also called lift check valves. They are essentially globe valves without the stem and top works, allowing the disc to respond to flow rates and direction. The disc has linear movement and is typically body-guided with conical seating surfaces. Springs can be added above the disc to provide more closure force when the disc returns to its closed position. Some manufacturers include externally attached equalizer piping to increase the disc opening with lower flows. The equalizer pipe is an open-pressure communication device that maintains equal pressure above the disc and in the piping downstream of the disc.






Depending on the valve body configuration (Y-pattern, angle, or T-pattern), the pressure drop could be close to that of a tilting disc check valve or much higher. The disc of this check valve design is stable in any open position and can be used with a wide range of flow rates.










Features of DIN/EN Piston Check Valves:

Lift Spring Loaded Disc Design

Bolted Cover

Internal Hinge Pin Design Standard

Through-body Hinge Pin Design Available

Renewable Seat

Flanged or Butt-welding Ends

One-way flow Control

Applicable Standards of DIN/EN Piston Check Valves:

a) Design&Manufacture:BS 1868, ASME B16.34

b) Face to Face: EN 558, ASME B16.10

c) Connection End: EN 1092, ASME B16.5, ASME B16.25

d) Test and Inspection: EN 12266, API 598, BS 6755

Sizes: 2" - 36" or DN50 - DN900

Pressure Rating: Class150 - Class2500 or PN16 - PN420

Material of Valve Body: WCB, LCB, WC6, WC9, C12, C5, CF8, CF3, CF3M, CF8M, etc.

Contact us if you need more details on DIN/EN Piston Check ValveS. We are ready to answer your questions on packaging, logistics, certification or any other aspects about DIN Piston Check Valve、EN Piston Check Valve. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Check Valve > Lift/Piston Check Valve