Lift-plate Wafer Check Valve

Lift-plate Wafer Check Valve


Single-plate wafer check valves prevent reverse flow with disc movement that is parallel with the flow. With this design, the disc is always in the flow path. Discs are spring-loaded to assist in seating. These wafer type check valves are bonnetless and are installed between flanges. The type of check valve disc has very short disc travel and responds very quickly to flow stoppage or reversal, thus minimizing the potential for water hammer. It is somewhat better than the tilting disc check valve at minimizing potential water hammer, but with a higher pressure drop.


Depending on the design, all wafer check valves must be removed from the line to perform maintenance due to the bonnetless design. The in-line disc design produces the most pressure drop when compared to other check valves of the same size.






Features of Lift-plate Wafer Check Valves:


One Piece Body Design

Short Face-to-face

Inline Lift Type Plate

Disc Spring Available




Applicable Standards of Lift-plate Wafer Check Valves:

a) Design & Manufacture:API 6D, API 594

b) Face to Face: API 6D, ASME B16.10, EN 558

c) Connection End: ASME B16.5, EN 1092, JIS B2220

d) Test and Inspection: API 6D, EN 12266, API 598

Sizes: 2" - 36" or DN50 - DN900

Pressure Rating: Class150 - Class600 or PN16 - PN100

Material of Valve Body: WCB, LCB, WC6, WC9, C12, C5, CF8, CF3, CF3M, CF8M, etc.

Contact us if you need more details on Lift-plate Wafer Check ValveS. We are ready to answer your questions on packaging, logistics, certification or any other aspects about API Lift-plate Wafer Check Valve、DIN Lift-plate Wafer Check Valve. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Check Valve > Dual Plate Check Valve